Whirl / Wet dust collection systems
provide air pollution dust control
and collect dusts above 5 microns.
High efficiency dust collection system
has low operating costs
employs a unique process to create intensive mixing of the dust
particles and water. To infuse dust particles with water
droplets, the mixture is passed with high velocity through a
fixed-position dual opposed blade system. The mixing of the
dust-laden airstream and liquid takes place and, to increase
turbulence, a tangential airstream is injected through a linear slot in
the lower blade assembly. Rotation is accelerated, droplets in
the airstream are eliminated through a mist eliminator located
downstream, and particulate material is deposited on the bottom of the
unit for recovery or disposal. Water level is maintained
automatically and make-up water is only necessary to compensate for
evaporation or sludge removal. Whirl/Wet operates in the 99%+
efficiency range for a wide variety of applications and over a wide
range of micron sizes. Click here if your particulate is 0.1 microns to 5 microns.
is effective for soluble and insoluble particles. Applications,
from metal grinding through food processing are ideally suited to the
Whirl/Wet. Energy generated inside the unit will not allow the
system to clog under any operating conditions; therefore, the
agglomeration and sticky residues that plug baghouses are not a problem
with the Whirl / Wet.
is a frequently specified dust collection system for the collection of
coal burning, aluminum, fertilizer and sugar dust, and is used for the
dust elimination requirements of the stone finishing industry, lead
particulate in the battery industry and every sector of the process
industries. Dust collection from grinding processes are excellent
applications for the Whirl/Wet. Venting is provided for
applications generating hydrogen gas. It is the leading dust
collection alternative wherever metal or plastic finishing generates
variable dust loadings.
is advantageous for materials recovery. Processes that were
not formerly candidates for materials recovery become good candidates
as a result of the Whirl/Wet. Click here for a comparison between Whirl/Wet and baghouse dust collection.
use is important, and Whirl Wet uses less water than any competitive
dust collection system. To demonstrate the effectiveness of Whirl Wet
dust collection in your facility, Tri-Mer offers a Pilot Plant Program.